Thrust angular contact ball bearing

 The characteristics of thrust angular contact ball bearing

The characteristics of two-way thrust angular contact ball bearings can be together bear the combined load of radial and axial load, the two aspects of bound shaft axial displacement. It is by the outer ring, inner ring, steel ball bearings ball and cage, can work stably under high speed. Equipment should pay attention to, while bearing can withstand dry bearing two-way axial load, but if one side has put the ball gap, should pay attention to don't let the first axial load through a gap on one side of the river bank. The precision of the thrust angular contact ball bearing is higher than the precision of the thrust ball bearing a lot of, can inherit the speed is high also many, can be used as a main shaft bearing.

Angular contact ball bearings

Angular contact ball bearings can bear radial load and axial jiashan together bearing factory to load. Can work under high speed. The larger the contact Angle, the axial bearing ability is higher. High precision and high speed bearing generally take contact Angle of 15 degrees. Under the effect of axial force, the contact Angle increases.

Single row angular contact ball bearings can only carry axial load in one direction, when bear radial load, will cause the additional axial force. And can only be bound shaft or shell axial displacement in one direction. Angular contact ball bearing tentacles to 40 degrees, so it can bear a large axial load. Angular contact ball bearing was right or wrong type of plan, respectively, the two ends of the inner and outer circle of the shoulder bump. In order to progress bearing load ability, can add on one shoulder work is low, then let more ball bearings can be put into.

Double ball bearing in pairs

If double equipment in pairs, make a pair of bearing outer ring, namely the wide end facing the wide end face, the narrow end face the narrow end. So to prevent the additional axial force, but also make the shaft in two directions or shell bound within the scope of the axial clearance.

Because of its outer ring raceway can have relative displacement in the horizontal axis, so can bear radial load and axial load together, joint load (single row angular contact ball bearings can only carry axial load, the single direction are often choose paired devices).

Keep the frame material made of brass, synthetic resins, in accordance with the method of bearing, using conditions and differences.

Angular contact ball bearing is bearing manufacturer manufacturing abroad, more domestic more applied to imported equipment such as 3204 rs angular contact ball bearing, etc.