Sliding bearing design points

Sliding bearing is surface contact, so the contact surface to maintain a certain oil film, so the design should pay attention to the following questions:
1, to make the oil film can smoothly into the friction surface.
2, the oil should be from the non-bearing area into the bearing.
3, do not make the whole ring oil tank open in the middle of the bearing.
4, such as oil tiles, seams open oil ditch.
5, to make the oil ring to the oil is fully reliable.
6, do not be blocked oil hole.
7, do not form the oil does not flow area.
8, to prevent cutting off the sharp edges and edges of the oil film.

Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.
Base materials in carbon steel, harden steel, iron, stainless steel, bronze, brass, copper, bronze-steel alloy.Lubricant materials in PTFE, teflon, POM, nylon, plastic, oil, graphite, grease, MoS2, etc.
Export to America,Canada,Brazil,Peru,Argentina,Chile,Paraguay,Europe,Finland,France,Germany,Italy,Spain,Sweden,
Britain,Estonia,Ukraine,Turkey,Austrial,Russia,Korea,Malaysia,Singapore,Thailand,Egypt,Kenya,Somali,
Congo,Zimbabwe,South Africa,etc.