Linear bearing is a low-cost production of linear motion system, for unlimited travel copper sleeve with the cylindrical axis in cooperation. Because the bearing ball and the shaft was point contact, so the use of small load.

The copper set of features is high hardness, excellent wear resistance, not easily get killed, good casting and machining functions, in the air and water, and have excellent corrosion resistance.

Hunan Jintai Hardware and Machinery Co., Ltd AUTOmechanika Exhibition,Time: 30 Nov,2016 - 4 Dec,2016,Address: Shanghai National Convention Center, Hall 4,2nd floor Auto Parts Area C:4.2N114

Copper sets of features is high hardness, excellent wear resistance, not easy to have killed the scene, a better casting and cutting function, in the atmosphere and fresh water has outstanding corrosion resistance.

Bearings that support the shaft parts, according to the nature of its sliding bearing operations conflict, the bearings can be divided into sliding conflict bearings (referred to as sliding bearings) and rolling collision bearings (referred to as rolling

The main failure of sliding bearings:tile surface corrosion: spectral analysis found that the abnormal concentration of non-ferrous metals; bearing bearing the emergence of many non-ferrous metal sub-micron wear particles; lubricants water exceeded the ac

The rotation of the bearing with a stethoscope and other tests, a strong metal noise, abnormal sound, irregular sound, such as abnormal. The reasons for poor lubrication, shaft or bearing poor accuracy, bearing damage, foreign body invasion and so on.

Hunan Jintai Hardware and Machinery Co., Ltd PTC Power Transmission Exhibition 2016 Shanghai : Time: November 1, 2016 - November 4, 2016, Address: Shanghai New International Expo Center,Hall E2,G2-1

Hunan Jintai Hardware and Machinery Co., Ltd AUTOmechanika Exhibition:Time: 30 Nov,2016 - 4 Dec,2016.Address: Shanghai National Convention Center, Hall 4,2nd floor Auto Parts Area C:4.2N114

PTC power transmission exhibition is Chinese only large-scale, professional, and the level of the most authoritative and most influential international power transmission and control technology exhibition.

Jintai is a professional manufacturer on various kind of bearings in China for over 15 years.here are bearing catalog,including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate

Analytical bearing species,Press bearing materials can be divided into bronze bearings, cast iron bearing, plastic bearings, jewel bearings, powder metallurgy bearings, self-lubricating bearings and oil bearings.

In a compact structure, sealing demanding parts are recommended to use sealed bearings. In addition to bearing the seal itself has a good dust, sealing effect, but also in the bearings during operation does not supply lubricant to maintain a good operatin

Regular inspection of bearing,Ambient temperature measurement is specified as 20 ℃, which bearing, in blocks, standard temperature and measuring instruments must be the same as the above put them in the same way a metal plate on the fastest way to achieve

Self lubricating bearings are mainly used in auto chassis, metallurgical machinery, mining machinery, irrigation machinery, construction machinery, agricultural machinery, steel rolling equipment.

If double equipment in pairs, make a pair of bearing outer ring, namely the wide end facing the wide end face, the narrow end face the narrow end. So to prevent the additional axial force, but also make the shaft in two directions or shell bound within th

When install on the cone shaft bearings, inner ring should be along the axial adjustment to the appropriate position, make its radial clearance is close to zero.

Punch retainers material, the use of low carbon steel. According to different purposes, also used brass, stainless steel plate. Cutting system maintains a material, the use of high-intensity brass, carbon steel, and also the use of synthetic resin

Machine condition damage, damage to the machine, and is the development of the imported bearing in the process of the running of the machine can be in the form of fault symptoms for identification.

Coal mining machinery equipment in coal mine is a mining, transmission, self-lubricating bearings for large-scale machinery and equipment transport, including mining machines, conveyors, mine Digging oil-bearing equipment, underground auxiliary transport

In recent years, Russia and Japan with low temperature rolling (below 800 ℃ ~ 850 ℃), using air cooling after rolling and annealing, short time or completely cancel the spheroidizing annealing process and they can get qualified bearing steel group.

Widely used: light industrial machinery, heavy machinery, construction machinery, metallurgical machinery, transport machinery, such as: continuous casting machines, rolling mills, injection molding machine, paper machine, mold guide column, ships, machin

Iron-based powder metallurgy products, using its pores may be impregnated quite a lot of sulfur, sulfur and heated iron can pore surface of iron sulfide, which is evenly distributed throughout the product plays a good lubrication on the friction surface e

Non-oil lubricated bearings Commentary,static and dynamic friction coefficients are similar, can eliminate crawling at low speed, thus ensuring the accuracy of machine operation;make the machinery to reduce vibration, reduce noise, prevent pollution and i

Sliding bearing damage prevention measures,to improve the design and manufacturing process design bearings or bearing selection, bearing to be considered to control the temperature of the heat balance.