Medium Duty ball units are machined from solid steel & case hardened for wear resistance. Reinforced machined steel top cap protect against impact from misalignment of the conveyed item.

3000pcs 06DU06 Inch DU Bearing Export To USA,Size: 06DU06 (11.906*9.525*9.525mm);500 pieces each of a equivalent to Garlock bushing 18DU16 & 18DU12 as well as 500 pieces of the equivalent to their G08 washer.Size: 18DU16,18TU16,18DU12,18TU12

Hunan Jintai Hardware and Machinery Co.,Ltd. Export slide bushing,C6300 bronze bushing,hydraulic cylinder parts,Hydraulic Damper Bushing to Hungary ,Type: JDB bearing,use material: C63000 NI AL BRONZE,Material trademark:CuAl10Ni5Fe4;Size:6*10/14*16

Jintai Export Oil sintered Bronze Bush Bearing,sintered bronze bush, sintered bronze bearing to Bangladesh ,Type: FU Oil sintered bearing,use material: CuSn10 Bronze powder,SAE841 9010 SINT A50 bronze;Size:6*10/14*16mm,use for Home appliance;Juicers, Blen

Hunan Jintai Hardware and Machinery Co.,Ltd. Export Flange DU Bushes Copper Collar with PTFE coated Bearing (Flanged Bushing Collar Bush, Flange DU Bushes Copper Collar,Collar Bush) to BANGKOK Thailand ,Type: Flanged Bushing Collar Bush,use material: Bron

The copper slider produced by Hunan Jintai Hardware and Machinery Co., Ltd. can meet the requirements of low-voltage rail-powered electric flat car manufacturers and has been recognized by manufacturers for many years.

Self-lubricating graphite copper sleeve products use centrifugal casting high-strength copper alloy as the base, the surface is set with special formula Solid lubricant; self-lubricating graphite copper sleeve is very suitable for use on the blow molding

Hunan Jintai Hardware and Machinery Co.,Ltd. specializes in producing all kinds of human-proof door copper sleeves, human-proof door skateboards, civil defense door upper and lower hinged copper sleeves, lock sleeves, and human-proof door copper worm gear

2018 China International Bearing & Industry Exhibition Date:19 Sep.-22 Sep.,2018,Address:Shanghai World Expo Exhibition and Convention Center,Hall 3, 3H3139.China Asia.Company:Hunan Jintai Hardware and Machinery Co.,Ltd.

2018 AUTOmechanika Exhibition Frankfurt Date:28 Nov.-1 Dec.,2018,Address:Shanghai National Covention Center,Booth Number: 8.2E63.Product:Sliding bearings,Adapter Sleeve,Withdrawal sleeve,DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,w

2018 PTC Power Transmission & Control Exhibition Time:2018.11.06-2018.11.09 Address:Shanghai New International Expo Center,E2K7.Products:Sliding Bearing,Adapter Sleeve,Ball Transfer Units, DU PTFE composit bushing, DX POM composite bushing,bimetal bushing

Hunan Jintai Hardware and Machinery Co.,Ltd. Export Bronze Wrapped Bush,FB090 bronze bush,WB800 bronze bush to Germany,use material: Bronze CuSn6.5;Quantity: 10000pcs,and we can custom various sizes.Use for Underwater Pelletizer Machines.

The excavator's working device and the various joints of the cylinder, the excavator bushings used according to the requirements and characteristics can be selected from high-strength graphite copper sleeves and reticulated steel sleeves.

The copper slider produced by Hunan Jintai Hardware and Machinery Co., Ltd. can meet the requirements of low-voltage rail-powered electric flat car manufacturers and has been recognized by manufacturers for many years.

Our company chooses the centrifugal casting copper sleeve produced by different materials, which can significantly improve the reliability and service life of the bushing products

According to different requirements, our company uses self-lubricating copper sleeves made of high-strength brass. It can significantly improve its hardness and load-bearing performance, and use a life higher than ordinary bronze in low-speed heavy-duty a

Our company - Hunan Jintai Hardware And Machinery Co.,Ltd export skate wheels conveyor bearings for more than 15years. It has different materials like carbon s

In order to meet the requirements of the cold drawing machine manufacturer for the use of rotating parts and life requirements, our company recommends customers to use self-lubricating graphite copper sleeve products.

In order to meet the requirements of granite mill manufacturers for the use of rotating parts and life requirements, our company recommends customers to use self-lubricating graphite copper sleeves and bimetals.

Hunan Jintai Hardware and Machinery Co.,Ltd. Export Sliding Gaskets,copper backing,copper gasket to Hungary,use material: base steel+teflon; PTEF (polytetrafluoroethylene);Size: 36x36x21mm,and we can custom various sizes.Use for machinery.

In order to meet the requirements of the smelting machinery manufacturer for the use of rotating parts and life requirements, our company recommends customers to use self-lubricating graphite copper sleeve products

As below pictures from our customers,you can see the application of sliding bearing for the oil gear pump.The shafts are supported in multi-layer bearings that have excellent antifriction properties.

Reticulated steel sleeves are more suitable for coal mining than general bushings. The machine has better lubrication and eliminates the need to refuel this part frequently.

The door type shearing machine has poor working environment, poor lubrication conditions and difficult maintenance. In order to meet the requirements of the door-cutting machine manufacturer for the use of rotating parts and life requirements.

Hunan Jintai Hardware and Machinery Co.,Ltd. Export DU Bucha (DU Bushing,DU Bush) to Brazil,use material:carbon steel+bronze powder+PTFE+polymer;Size: various sizes like 22x25x12mm,23x26x15mm,24x27x20mm,25x28x10mm,28x32x15mm,30x34x15mm,32x36x30mm etc.Appl