A bearing engineer for bimetal bearing rust method
2015-09-17
Easy to rust, easy to corrosion of metal is a well known phenomenon, therefore, metal rust is imperative.The following is a bearing engineer for bimetal bearing rust prevention methods:
Surface cleaning:
1, surface cleaning: cleaning must be rust in accordance with the nature of the surface and the conditions, select the appropriate method.There are usually used solvent cleaning, chemical cleaning and mechanical cleaning.
Available after 2, dry surface clean filter dry compressed air blow dry, or in 120 ~ 170 ℃ dryer for drying, also can use clean cloth to wipe dry.
Second, the method of coating anticorrosive oil:
1, soaking method: some small items by soaking in antirust oil, make its surface adhesion on a layer of anti-rust oil.The temperature of the oil film thickness can be controlled by anti-rust oil or viscosity to achieve.
2, brush method used for soaking or spraying outdoor construction equipment or not apply special shaped products, brush should not only pay attention to not build up, also should pay attention to prevent leakage.
3, spray a few large rust cannot be oiled by soaking method, approximately 0.7 Mpa pressure filter is commonly used in compressed air for spraying in clean air.Spray method used solvent XiShiXing rust-proof oil or thin layer of anti-rust oil, but must use perfect fire protection and labor protection measures.
(Chat Online)
