Solid lubricated bearings
2018-03-28
Solid lubricated bearings and non-lubricated bearings are intrinsically indistinguishable from friction-based copper-based solid inlaid lubricated bearings, except that solid lubricated bearings participate in the friction of the surface solid self-lubricated steel casing material to prevent the two surfaces from sticking, reduce the friction factor, and reduce Small wear and deliberately placed.
The use of solid-lubricated oil-free bearing bushings can save electricity, petroleum products and non-ferrous metals, and prevent the oil from polluting the environment. Solid lubricants are suitable for:
.jpg)
.jpg)
1. High temperature, high pressure working environment, such as extrusion, stamping, drawing, pressing and so on.
2. Low speed conditions, such as machine tool rails.
3. Wide temperature range.
4. Parts that operate under high vacuum conditions do not damage their vacuum.
5. Parts that operate under strong irradiation conditions, the solid lubricant slowly deteriorates under strong irradiation.
6. In cases where corrosion is required, solid lubricants will not react with air, solvents, fuel, oxidizers, etc., and can work in environments such as acids, alkalis, and seawater.
7. There is a dusty environment.
8. It is necessary to strictly avoid occasions where lubricants contaminate the product, such as food, textile, paper, medicine, printing and other equipment.
9. When grease is easily washed away.
10. It is very inconvenient for oil supply.
The friction factor of solid lubrication is usually higher than that of oil or grease, and there is no cooling effect, and it does not contribute to the discharge of wear debris.
Hunan Jintai Hardware and Machinery Co.,Ltd. is a professional manufacturer on various kind of bearings over 15 years China factory.
We are making all kinds of slide bearings including DU PTFE composit bushing, DX POM composite bushing,bimetal bushing,wrapped bronze bushing, cast sliding bushings and wear plate bearing pad, sintered bronze bushing and sintering parts, ball transfer bearings, etc.
The shapes of bearings can be in sleeve, flanged, spherical, plate, washer, pad, ring, square etc.
Base materials in carbon steel, harden steel, iron, stainless steel, bronze, brass, copper, bronze-steel alloy.Lubricant materials in PTFE, teflon, POM, nylon, plastic, oil, graphite, grease, MoS2, etc.
Export to America,Canada,Brazil,Peru,Argentina,Chile,Paraguay,Europe,Finland,France,Germany,Italy,Spain,Sweden,
Britain,Estonia,Ukraine,Turkey,Austrial,Russia,Korea,Malaysia,Singapore,Thailand,Egypt,Kenya,Somali,
Congo,Zimbabwe,South Africa,etc.
(Chat Online)
