Oil-bearing short broken reasons

Oil-bearing short broken reasons
 Resulting in oil-bearing short-term use can damage is what causes it? The following small series to introduce possible causes of damage.
   Customers can also be judged from the following four aspects:
   1, poor lubrication (about 50%)
According to the survey, poor lubrication is one of the main causes of premature bearing damage. Main reasons include: not timely filling of lubricants or lubricants; lubricants or lubricants are not filling in place; improper selection of lubricants or lubricants; lubrication is not correct, and so on.
Recommendation: Select the correct lubricant or lubricant, lubricant filling the correct way.
   2, fatigue (about 34%)
Bearing fatigue failure is a common way of damage. Common fatigue failure may be: bearing long-term overload operation; not timely maintenance; improper maintenance; equipment aging.
Recommendation: Select the appropriate type of bearing, regular and timely replacement of bearing fatigue.
    3, improper installation (about 16%)
(1) the use of brute force during installation, a direct hit with a hammer bearing for bearing the greatest harm; is the main cause deformation.
(2) the installation is not in place, install a deviation or mounted to the bearing position, causing the bearing clearance is too small. Inner and outer rings is not in the same center of rotation, resulting in a different mind.
Recommendation: Select the appropriate or professional bearing installation tool, use special detection equipment installed.
4, pollution (about 14%)
Pollution can also cause premature bearing damage, pollution is sand, metal shavings from entering the bearing. The main reasons: prior to use to open prematurely bearing packaging, causing pollution; installation dirty work environment, causing pollution; bearing dirty work environment, the working medium pollution.
Recommendation: Do not open before use bearing packaging; clean installation environment of the installation, the bearing to be used for cleaning; reinforced seal bearing.
These are the most common cause of several causes of early bearing damage, of course, cause early bearing failure are many, it may sometimes be comprehensive reasons. However, if the bearing when using the above four areas can be completely correct, bearing still can work very often time.